

UK's largest supplier of Used pallet racking



Over 30 years industry experience



100's of 5 star rated reviews



Up to 40% discount applied at checkout

Pallet Racking Frame Duty: What Is Mine and How Do I Find It?

Jul 29, 2026 | News

Engineer in a hi-vis vest with a hard hat and a clipboard, inspecting pallet racking in a fully stocked well organised warehouse

Understanding Frame Duty for Warehouse Shelving and Pallet Racking

Choosing the right frame duty is one of the most important decisions when buying or expanding pallet racking. Whether you’re installing a new warehouse system or replacing existing frames, understanding frame duty ensures your storage is safe, compliant, and capable of supporting your inventory.

In this guide, we’ll explain what frame duty is, why it matters, how to identify the frame duty of your existing racking, and how it differs across popular brands including Apex, Dexion, and Link 51.

What Is Frame Duty?

Frame duty refers to the maximum safe load capacity of a pallet racking upright frame. It is the total vertical load that a pair of uprights can safely support when installed correctly and used within the manufacturer’s guidelines.

Frame duty depends on several factors, including:

  • Upright profile size
  • Steel thickness
  • Frame height
  • Bracing configuration
  • Base plates and fixings
  • Beam levels and spacing
  • Installation method

How Do I Find My Frame Duty?

If you’re unsure what frame duty your pallet racking has, there are several ways to identify it.

  • Check the load notice
  • Check the uprights for stamps or labels
  • Contact the pallet racking supplier

Below are a few images of popular pallet racking brands to help you in locating the markings on your frames to identify the manufacturer and the duty.

Image of an apex pallet racking frame showing where to find the duty stamped on the frame

Apex Frame Duty Example

Apex frames are stamped with APEX, then UK followed by a number. The number is the frame duty and this stamp can be found on the side of the upright.

Dexion Speedlock Mk3 Frame Duty Example

Dexion Speedlock frames will be stamped with DEXION SPEEDLOCK and a little further down will be a letter. Either an R, M or H etc, for Regular, Medium or Heavy Duty. The stamp is located on the face of the upright.

Image showing a Dexion P90 frame and where to find the duty markings on the frame

Dexion P90 Frame Duty Example

Similar to Dexion Speedlock, P90 is also stamped on the upright face with DEXION P90. Again further down you will see a letter stamped to correspond with the duty. In this instance an M for medium duty.

Link 51 Frame Duty Example

Found stamped on the front face of the upright, you will find LINK51 followed by a letter. This could be M, H, S or E, for Medium, Heavy, Super Heavy or Extra Heavy to indicate the duty.

PSS K Series Frame Duty Example

PSS duty is stamped as a number underneath the series. The image above is of a K Series frame however this would be the same for a P series frame. The only difference is instead of 2KL85, it might say P85. The number underneath refers to the thickness of the steel, which tells us the duty required. The stamp is located on the front face of the uprights.

RediRack Frame Duty Example

Located on the side of the upright post is where you will find the duty for a RediRack frame. This will be stamped with either SD or HD followed by a number. The number tell us the thickness of the steel and the duty required.

Image of where to find the duty on a Stow pallet racking frame

Stow Frame Duty Example

To locate the duty on a Stow frame the marking will be stamped in between the slots on the upright face. Stow frames are stamped with a number e.g. 12, 16 etc to indicate the duty.

Frequently Asked Questions

Is frame duty the same as beam capacity?

  • No. Beam capacity refers to the maximum load or UDL (Uniformly Distributed Load) a pair of beams can safely carry, while frame duty is the maximum vertical load the upright frame can support. Both values must be considered together.

Can I increase my frame duty?

  • Not usually. Increasing frame duty typically requires different uprights or a redesigned configuration. Simply replacing beams will not increase the frame’s load capacity.

How often should pallet racking be inspected?

  • A visual inspection should be carried out regularly by warehouse staff, with a more detailed inspection performed periodically by a competent racking inspector, in line with industry guidance and workplace risk assessments.

What if my load notice is missing?

  • If the load notice is missing, do not guess the capacity. Identify the manufacturer where possible, and seek advice from a qualified racking supplier or engineer before loading the system.

Conclusion

Knowing your frame duty is essential for maintaining a safe, efficient, and compliant warehouse. Whether your pallet racking is manufactured by Apex, Dexion, or Link 51, understanding the load capacity of your frames helps prevent overloading, supports warehouse safety, and ensures your storage system performs as intended.

If you’re expanding your warehouse, replacing damaged uprights, or simply unsure of your existing frame duty, identifying the manufacturer, measuring the uprights, and consulting a storage specialist are the safest ways to ensure you select the correct components.

If you need any assistance or guidance in identifying your system, contact us on 0800 612 3210: our friendly sales team are on hand to help you to make sure you have the correct components for your system.

Latest Posts

5 Star Rated Service 

Get in touch

Get in touch now with our friendly sales team to discuss your requirements.

Shelving & Racking Ltd
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Cookies are used for ads personalisation

You can adjust all of your cookie settings by navigating the tabs on the left hand side.